Amigurumi Bunny Liliac Free Pattern

#amigurumi #freepattern #freepatternamigurumi #crochettoppattern #crochet #crochetpattern #amigurumibunny #crochetbunny

What does amigurumi means?
The word Amigurumi comes from Japanese. The Japanese call handicrafts knitted with crochet and needle as Ami. The Japanese call the toys that are filled with objects such as fibers or cotton as Nuigurumi. The word Amigurumi is derived as a combination of these two words.

Amigurumi knitting techniques are very easy. You can find many handcrafts prepared with these techniques on my site. What is Amigurumi for beginners in Amigurumi handwork? How to knit amigurumi? In this blog, where you can find the answers to the questions with pictures, you will be able to learn about Amigurumi in all details.

I share in this blog are amigurumi cats, amigurumi dogs, amigurumi fish, amigurumi unicorn, amigurumi penguins, amigurumi parrot, amigurumi giraffe, amigurumi pigs, amigurumi bunnies, amigurumi cows, amigurumi sheeps, amigurumi bees, amigurumi dolls, amigurumi snakes, amigurumi mice, amigurumi elephants, amigurumi pumpkins, amigurumi pandas, amigurumi owls, amigurumi cartoon characters, amigurumi twetters, amigurumi caterpillars and more …

Also I’m sharing new amigurumi free patterns every day.
Todays daily new amigurumi free crochet pattern is Bunny
I want to give you some informations about this pattern;

Author: Dam’M (Alexia Giraud)

Abbreviations
vp – air loop
ss – connecting loop
pssn – half-column with crochet
sc – single crochet
ssn – double crochet
KA – amigurumi ring
pr – increase
ub – decrease

About the hook:
For a good result, make sure you use the smaller hook. size than is usually recommended for your yarn. So, you will have knit tight enough to avoid large holes between columns through which the filler could peep. So Thus, if the yarn manufacturer recommends using a 3.5 hook, then better to take a hook 3.

About yarn:
Personally, I prefer to use cotton yarn for this kind of project, since it will not stretch after you fill the parts tightly. It also has the advantage of being very durable. If you decide use a different yarn, then for optimal results choose non-elastic and durable. The thickness of the yarn is not of great importance has, just your toy will be of different sizes.

About filler:
There are many types of fillers and the choice is yours. For the best
As a result, I recommend filling the details as tightly as possible.

Body:
We knit with yarn of the 2nd additional color
1p – 6 sbn in spacecraft
2p – 6pr (12)
3p – (1sbn, pr) * 6 (18)
4p – (2sbn, pr) * 6 (24)
5p – (3sbn, pr) * 6 (30)

6p – (4sbn, pr) * 6 (36)
7p – (5sbn, pr) * 6 (42)
8p – (6sbn, pr) * 6 (48)
9p – (7sbn, pr) * 6 (54)
10-18rr – 54sc (9 rows)
19r – (7sbn, ub) * 6 (48)

Change the color to the main one.
20-21rr – 48sc (2 rows)
22p – (6sbn, ub) * 6 (42)
23-24rr – 42sc (2 rows)
25r – (5sbn, ub) * 6 (36)

26r – 36sbn
27r – (4sbn, ub) * 6 (30)
28r – 30sbn
29r – (3sbn, ub) * 6 (24)
30r – 24sbn
31r – (2sbn, ub) * 6 (18)
32r – 18 sbn

Finish ss. Cut the thread. Fill tightly with filler.
If you knit a bunny boy, then you need to change the color to the main one after
17th row. Everything else is the same as for the girl.

Tail:
We knit with yarn of the main color
1p – 6 sbn in spacecraft
2p – 6pr (12)
3p – (1sbn, pr) * 6 (18)
4-5rr – 18sbn (2 rows)
6p – (kill, 1sbn) * 6 (12)
7p – 12sbn

Finish knitting ss. Trim the yarn, leaving a ponytail long enough (30cm) for sewing.
Head:

We knit with yarn of the main color.
1p – 6 sbn in spacecraft
2p – 6pr (12)
3p – (1sbn, pr) * 6 (18)
4p – (2sbn, pr) * 6 (24)
5p – (3sbn, pr) * 6 (30)
6p – (4sbn, pr) * 6 (36)

7p – (5sbn, pr) * 6 (42)
8p – (6sbn, pr) * 6 (48)
9p – (7sbn, pr) * 6 (54)
10-18rr – 54sc (9 rows)

19r – (7sbn, ub) * 6 (48)
20r – (6sbn, ub) * 6 (42)
21r – (5sbn, ub) * 6 (36)
22p – (4sbn, ub) * 6 (30)
23r – (3sbn, ub) * 6 (24)
24p – (2sbn, ub) * 6 (18)

Finish knitting ss. Trim the yarn, leaving a tail long enough (80cm) to sew the head to the body. Place your eyes in between 17 and 18 rows at a distance of 11 sbn. Stuff the head is very tight.

Beanie:
We knit with yarn of the 1st add. colors.
1p – 6 sbn in spacecraft
2p – 6pr (12)

3p – (1sbn, pr) * 6 (18)
4p – (2sbn, pr) * 6 (24)
5p – (3sbn, pr) * 6 (30)
6p – (4sbn, pr) * 6 (36)
7p – (5sbn, pr) * 6 (42)
8p – (6sbn, pr) * 6 (48)

9p – (7sbn, pr) * 6 (54)
10-21rr – 54sc (12 rows)
22p – (7sbn, ub) * 6 (48)

Change color to 2nd add. color (purple) 23r – (6sbn, ub) * 6 (42)
Finish knitting ss. Leave the thread to be sewn to the head about 30 cm.
Note. I knitted a hat exactly according to the description, and I got it
very deep. Perhaps it will be better if you knit not 12 rows of 54sc, but 10.

Handles (2pcs):
We knit with yarn of the main color
1p – 6 sbn in spacecraft
2p – 6pr (12)
3p – (1sbn, pr) * 6 (18)

4p – (5sbn, pr) * 3 (21)
5-6p – 21sc (2 rows)
7p – (ub, 1sbn, ub, 2sbn) * 3 (15)
8p – 15sbn

Change color to 1st additional color
9p – 15sbn
10p – ub, 5sbn, ub, 6sbn (13)
Change color to main
11-12rr – 13sbn
13r – dec, 11sbn (12)
14-17rr – 12sbn (4 rows)

Stuff tightly with filler. The rest of the handle does not need to be filled.
18r – dec, 10sbn (11)
19-25rr – 11sc (7 rows)

Knit 1sbn more, then fold in half and knit 5sbn. Trim yarn, leaving a tail (30cm) long enough for sewing.

Legs (2pcs):
We knit with yarn of the 1st add. colors
1p – We collect 6 vp. Starting from the 2nd loop from the hook, 4sc, 4sc in the last
loop. Turn the work and knit from the back side, 4sbn, 3sbn in the last loop (15)

2p – 1pr, 4sbn, 3pr, 5sbn, 2pr (21)
3p – 2pr, 6sbn, 2pr, 8sbn, 3pr (28)
4p – 1pr, 27sbn (29)
5p – we knit by the back wall of the loop 29sc (29)
6-7rr – 29sc (2 rows)
8p – 9sbn, 4ub, 10sbn, ub (24)

Change color to main
9p – 9sbn, 3ub, 9sbn (21)
10p – 9sbn, 3sbn knit together, 9sbn (19)
11p – 9sbn, ub, 8sbn (18)
12p – 18sbn
13p – (ub, 4sbn) * 3 (15)
14-16rr – 15sbn (3 rows)
17r – (ub, 3sbn) * 3 (12)
18-19rr – 12sbn (2 rows)

Change color to 2nd additional color (purple)
20r – 12pr (24)
21-22rr – 24sbn (2 rows)

Finish knitting ss. Trim the yarn, leaving a ponytail long enough
(30cm) to sew the leg to the body. Fill very tightly.
Ears (2pcs):

We knit with yarn of the 1st additional color.
1p – 6sbn in spacecraft
2p – 6pr (12)
3p – (1sbn, pr) * 6 (18)
4p – (8sbn, pr) * 2 (20)
5p – (9sbn, pr) * 2 (22)
6-8rr – 22sc (3 rows)

Change color to main
9-12rr – 22sc (4 rows)
13p – (ub, 9sbn) * 2 (20)
14-16rr – 20 sbn (3 rows)
17r – (ub, 8sbn) * 2 (18)
18-20rr – 18sbn (3 rows)
21r – (ub, 7sbn) * 2 (16)

22-24rr – 16sc (3 rows)
25r – (ub, 6sbn) * 2 (14)
26-28rr – 14sbn (3 rows)
29r – (ub, 5sbn) * 2 (12)
30-32rr – 12sbn (3 rows)
33r – (ub, 4sbn) * 2 (10)
34-36rr – 10sc (3 rows)

Knit 1sbn more, then fold in half and knit 4sbn. Trim yarn, leaving a tail (30cm) long enough for sewing.

Assembly (Head-Body-Beanie):
Place your head over your body, making sure so that the tails of the yarn are on one side.
This will be the back of the toy. Attach head to body with sbn, grabbing loops of the head and body at the same time. Fasten the thread, cut, hide the tail. Put a hat on your head and sew.

Pens:
Sew both handles to the body 1 row below
body-to-head connections.

Ears:
Sew the ears to the cap, placing them starting from the 5th row from the center.
Legs:
Sew both legs tightly to the body

Tail:
Sew the tail tightly to the back of the body, while stuffing with filler.
Option 1 (Tutu skirt):

Hold the toy upright with your head down. back to you. Choose where you want
place the pack.
1 row – you need to knit the initial row of sbn on body of the toy: insert the hook horizontally under 1 loop and exit on the other side of the loop, grab the yarn, stretch and knit sbn (very weak). Insert the hook into the next loop of this row, knit sbn as well as it was done earlier. Repeat around everythingbodies, making sure to stay on the same row.

Because the body is knitted in a spiral, the end the row will not be at the same level as the beginning, so being in the middle back, you need to make the transition. Finish a row of ss. 2nd row – 3 vp lifting and 2ssn in the same loop, then we knit 3ssn in each loop of the base. Finish ss in the 3rd vp. İn the beginning of the row. 3rd row – 3 vp lifting, then 1ssn in each loop the previous row. Finish ss in the 3rd vp. at the beginning row.

Option 2 (Dress):
Hold the toy upright with your head down, with your back to you.
1 row – under the 6th row of the body you need knit the initial row of sc on the body toys: insert hook horizontally under 1 loop and exit with the other side of the loop, grab the yarn, stretch and knit sbn (very weak).

Insert the hook into the next a loop of this row, knit sbn also, as we did earlier. Repeat around the whole body, making sure that stayed in the same lane. Because body knits in a spiral, the end of the row is not will be at the same level as and the beginning, therefore being in the middle back, you need to make the transition. Finish a row of ss.

2nd row – 3 vp lifting and 1ssn in the same loop, then we knit 2ssn in each loop grounds. Finish ss in the 3rd vp. at the beginning of the row. 3 – 7 rows – start with 3 vp and knit further 1ssn in each loop the previous row. Finish ss in the 3rd vp. at the beginning of the row. 8 row (wavy) – 3 vp lifting and 1ssn in the same loop, then we knit 2ssn in each loop of the base. Finish ss in the 3rd vp. at the beginning of the row. A thread trim and hide the ends.

Lamb. (see the location on the photo)
We fix the thread on the back ss in the 1st row of the dress, knit 19 vp. and, as it were crossing, we lead forward and fix there in the middle of 2cc, also in the 1st dress row. Then 19 vp. and we lead back, crossing with the first strap,
fix the ss in the 1st row of the dress on the back. Cut and hide the thread tips.

Backpack
Side parts.
We knit in rotary rows 3 vp turn
We knit the next 10 rows: 1v.p., 3sc, turn. Fasten the thread and trim.
Tie another similar piece.

The main detail.
We knit in rotary rows.
10 vp we turn.
We knit 34 rows: 1v.p., 10sc, turn.
Without breaking the thread, place the markers as follows (see figure):

Marker A (MA) – 10 rows down
Marker B (MV) – 2 rows below A
Markers D and E (MD and ME) – same as A and B, only on the other side

Marker C (MC) – 10 rows below D
Assembly and straps
Now we will connect the main part with the side ones, tying the main part, attaching the 1st side part, then tying the sbn top and then attaching the 2nd side part. To be sure what is right placed the side parts relative to the main one, we will be guided on markers.

Place the 1st side piece on the side of the main part of the backpack between current loop (where we left off) and MA. Now we will knit capturing the loops of both parts: 1sbn in the same loop, 8sbn, pr (corner).
Turn the work, continuing to tie the side of the rukzak, 1sbn, pr (corner).
Turn work again, 9sbn.

We have successfully attached the 1st side section.
We continue to knit around the top as follows: 11sbn, pr (angle), 8sbn, pr (angle), 11sbn.
Now you can attach the 2nd side part to the main one, knitting again simultaneously hinges of both parts. Place the 2nd side piece along sides of the main between MS and MD, 9sbn, pr (angle). Turn work, 1sbn, pr (angle). Turn work, 9sbn.

We have successfully attached the 2nd side section.
Don’t cut the thread just yet. We still need to make straps: we knit 3cc along the top of the side part to be behind the backpack, 25 vp, 1sc in the middle of the bottom of the back of the backpack (see photo), 25 vp, ss, to attach the 2nd the strap is symmetrical to the first at the top of the back of the backpack.
Cut the thread and hide all the ends.

The bow tie:
We knit in rotary rows 3 vp turn
We knit 1 – 4 rows: 1v.p., 3sc, turn
5 row – 1 vp, 3sc together, turn
6 row – 1 vp, 3sc from 1 loop, turn
7 – 10 rows – 1 vp, 3sc, turn (thread do not cut off)

Next, we tie it as follows:
1v.p., 2sbn, 3sbn in 1 loop (corner), 9sbn, 3sbn in 1 loop (corner), 1sbn, 3sbn in 1 loop (corner), 9sc, 2sc in 1 loop (1st row loop), ss. Cut the thread, leaving end long 20cm.
Fold your bow tie in half lengthwise and secure in the middle with a few stitches. Dial 30v.p., secure

thread and cut, leaving an end with a length of 30cm. Wrap one end of the chain vp around the middle of the bow tie 2-3 times. Make a knot and secure. The other end of the cp chain wrap around the bunny’s neck and secure it under bow tie. To secure, thread the yarn through your neck and print on the back of the head.

Bunny-Liliac-AFP

Related Posts

Amigurumi Peter Rabbit Free Crochet Pattern

Amigurumi Fancy Bunnies Free Crochet Pattern

Bir cevap yazın Cevabı iptal et