#amigurumi #freepattern #freepatternamigurumi #crochettoppattern #crochet #crochetpattern #amigurumipenguin #crochetpenguin
What does amigurumi means?
The word Amigurumi comes from Japanese. The Japanese call handicrafts knitted with crochet and needle as Ami. The Japanese call the toys that are filled with objects such as fibers or cotton as Nuigurumi. The word Amigurumi is derived as a combination of these two words.
Amigurumi knitting techniques are very easy. You can find many handcrafts prepared with these techniques on my site. What is Amigurumi for beginners in Amigurumi handwork? How to knit amigurumi? In this blog, where you can find the answers to the questions with pictures, you will be able to learn about Amigurumi in all details.
I share in this blog are amigurumi cats, amigurumi dogs, amigurumi fish, amigurumi unicorn, amigurumi penguins, amigurumi parrot, amigurumi giraffe, amigurumi pigs, amigurumi bunnies, amigurumi cows, amigurumi sheeps, amigurumi bees, amigurumi dolls, amigurumi snakes, amigurumi mice, amigurumi elephants, amigurumi pumpkins, amigurumi pandas, amigurumi owls, amigurumi cartoon characters, amigurumi twetters, amigurumi caterpillars and more …
Also I’m sharing new amigurumi free patterns every day.
Todays daily new amigurumi free crochet pattern is Penguin
I want to give you some informations about this pattern;
Height 8-9 and 5-6 cm.
Tools and materials:
Yarn ALIZE Cotton Gold, 55% cotton, 45% acrylic, 330 m / 100 g. Analogous to the specified yarn
is YarnArt Jeans.
Pin: black, white, red, yellow, brown;
Bibi: yellow, light blue or light gray, brown, red, green, dark grey.
Slightly thinner white yarn for the eyes, in this version VITA cotton Soso,
another one is possible (not less than 200 m / 50 g).
Mouline threads are green.
Foam balls d = 6 and 4 cm.
Black sewn on rhinestones d = 8 mm for pupils.
Hook – 2 or 2.5 mm; 1.25 – 1.5 mm.
The filler is holofiber.
Legend:
VP () – air loop
RLS () – single crochet
SS () – connecting post
PR () – increase
UB () – decrease
PR 3in1 () – 3 single crochet, knitted in the same column of the previous row
PRSP () – half double crochet
PR PRSP () – an increase from half-columns with a crochet
All parts, unless otherwise stated, are knitted in a spiral
PIN
Head – body (black, white):
We start knitting with black thread
1 p: 6 sc in the amigurumi ring
2 p: 6 PR = 12 sc
3 p: (PR, 1 sc) * 6 = 18 sc
4 p: (2 PRS, OL) * 6 = 24 PRS
5 p: (PR, 3 RLS) * 6 = 30 RLS
6 p: (3 PRS, PR, 1 PRS) * 6 = 36 PRS
7 p: (PR, 5 sc) * 6 = 42 sc
8-12 RR: 42 PRS
() * 6 – repeat 6 times
Next, we will knit a white belly, so we knit the next rows without displacement. For
this at the end of each row, instead of the last sc, we do [SS, VP]. On this spot
a small seam is formed, but it will be at the back, and on black it is almost invisible.
We knit all white columns that are knitted in black on the back wall (indicate
this will not be in each row).
Change the color on the last column. * 13 p: black: 18 sc, white: 5 sc for the back wall, black:
18 sc …
13 p: black: 18 sc, white: 5 sc, black: 18 sc, SS, VP = 42
In the 14th and next rows of SS we do, skipping 1 loop
14 p: black: 16 sc, white: 9 sc, black: 16 sc, SS, VP = 42
15 p: black: 14 sc, white: 13 sc, black: 14 sc, SS, VP = 42
16 p: black: 13 sc, white: 15 sc, black: 13 sc, SS, VP = 42
17 p: black: 12 sc, white: 17 sc, black: 12 sc, ss = 42
Cut the black thread, leaving the end ≈ 1 m long, fix it.
We insert the ball. About 1/4 of the ball should remain uncovered and knitting should
wrap around the ball quite tightly. It is problematic to adjust this ball,
the maximum that can be done is to knit another even white row. If not at all
fits, you will have to dissolve and change (+ / -) the number of black rows at the beginning of the ball.
Then we knit with a white thread, again in a spiral. We transfer the beginning of the row to where we have
the working end of the white thread.
In the next row, wherever the color changes, we also knit the columns for the back wall. the end
leave the black thread outside.
18 p: (3 sc, UB, 2 sc) * 6 = 36 sc
19 p: (UB, 4 sc) * 6 = 30 sc
20 p: (2 sc, ub, 1 sc) * 6 = 24 sc
21 p: (UB, 2 RLS) * 6 = 18 RLS
22 p: (1 sc, UB) * 6 = 12 sc
23 p: 6 UB = 6 PRS
Cut the thread, pass the end through everything
the remaining loops and tighten the hole.
We return to the left end of the black thread. Along the border of flowers, we have left everywhere
free front walls of black columns. Behind these front walls with the end of the black
the threads against the knitting course we knit a row of SS.
At the end of the row, we make another SS in the first loop,
we fix the thread, remove.
We celebrate Mark 7 back loops. It’s easy to find them
exactly in the middle we have a seam.
We knit a ponytail with a black thread. We hold the ball with the black side facing us. Initial end leave ≈ 50 cm.
1 p: attach the thread to the 1st of the marked loops, do VP, knit 5 RLS, SS (falls on the last loop of the marked), VP, unroll knitting
It is better to knit the 2nd row with purl RLS.
They fit like ordinary ones, only a hook
is introduced due to knitting, and the thread is picked up from the front.
2 p: starting from the 3rd loop from the hook (the loop on the hook does not count) UB, 1 RLS, UB, VP,
deploy
3 r: starting from the 3rd loop from the hook (it does not count on the hook) UB, cut the thread, fasten
We attach the initial end from the side to the nearest free loop (we do not do the VP),
we knit 3 sc on the side, PR 3in1 in the corner, 3 sc on the side, SS in the next after the tail.
Pull the end of the thread, remove it inside and fix it there.
Eyes (white), 2 pcs:
We take thin yarn, hook 1.25-1.5 mm
1 p: 6 sc in the amigurumi ring
2 p: 6 PR = 12 sc
3 p: (PR, 1 sc) * 6 = 18 sc
We make a SS, cut the thread, leaving the end for
sewing, fix.
Sew on rhinestones, stepping back 1 row from the edge of the eye to the center.
Sew on with a bobbin thread in half, after each
stitch the thread tightly, but carefully pull it so that the strass
fit more tightly.
We find the middle of the front of the body, focusing on it, we will sew on the eyes.
Sew the eyes at a distance of 6 rows from the crown (initial ring), the distance between
eyes 1 column, pupils mow inward.
Beak (red):
1 p: 4 sc in amigurumi ring
2 p: (PR, 1 RLS) * 2 = 6 RLS
3 r: PR, 5 RLS = 7 RLS
4 p: 1 RLS, PR, 2 RLS, 2 SS, 1 RLS
5 p: 1 PRS, 2 PRSP, 1 PRS, PR PRSP, 2 PRS, PR PRSP
6 p: 1 PRS, 2 PR, 1 PRS, PR, 4 SS, PR
7 p: 7 PRS, PR PRSPN, 4 PRSN, PR PRSPN, SS
Cut the thread, leaving the end for sewing,
fix.
We fill the beak. Pin up: the middle of the upper part between the eyes, one row above their lower
the edges; stretch the side corners to the sides; the bottom part turns out to be flat, ≈ per row
above the border of flowers. The tip of the nose should be curved downward.
We do not sew until the end, when a small hole remains, add filler, then
we finish sewing.
Legs (red), 2 pcs:
Divide the main thread (it is twisted from 4 threads) in half lengthwise, take a thin hook.
Foot:
We collect a chain of 5 VP (the loop on the hook does not count)
1 p: starting from the 2nd loop from the hook 3 sc, 3 sc in one
loop (this should be the outermost loop of the chain), continue
in a circle: 2 sc, 2 sc in one loop (must be extreme
loop from the chain with which the row began) = 10 RLS
2 p: (PR, 2 RLS, PR, 1 RLS) * 2 = 14 RLS
3 p: 14 sc
we knit 1 sc to move the beginning of the row
1 p: starting from the 2nd loop from the hook 3 sc, 3 sc in one
loop (this should be the outermost loop of the chain), continue
in a circle: 2 sc, 2 sc in one loop (must be extreme
loop from the chain with which the row began) = 10 RLS
2 p: (PR, 2 RLS, PR, 1 RLS) * 2 = 14 RLS
4 p: (5 sc, UB) * 2 = 12 sc
5 p: (4 sc, UB) * 2 = 10 sc
we knit 1 sc to move the beginning of the row
6 p: (3 PRS, UB) * 2 = 8 PRS
We fill the foot slightly, it should remain almost
flat.
7 p: (2 sc, ub) * 2 = 6 sc
We make a SS, cut the thread, tighten the hole
Foot:
1 p: directly on the foot we dial 6 sc
2-3 pp: 6 sc
We make a SS, cut the thread, leaving an end for sewing, fix.
We stuff the legs, sew at the bottom, around the place tightening the body, the foot “looks” forward
Wings (black), 2 pcs:
1 p: 4 sc in amigurumi ring
2 p: (PR, 1 RLS) * 2 = 6 RLS
3 p: (PR, 2 sc) * 2 = 8 sc
4 p: 8 sc
5 p: (PR, 3 RLS) * 2 = 10 RLS
6 p: 10 sc
7 p: (PR, 4 sc) * 2 = 12 sc
8 p: 12 sc
9 p: (UB, 2 RLS, UB) * 2 = 8 RLS
We do not stuff the wings. We knit 1 more sc, shifting the beginning row. Fold the part in half and tie it through both edges: 2 sc, ss = 3
We make a SS, cut the thread, leaving the end for sewing, fix.
Sew on the sides at the level of the middle of the nose.
Helmet (yellow):
1 p: 6 sc in the amigurumi ring
2 p: 6 PR = 12 sc
3 p: (PR, 1 sc) * 6 = 18 sc
4 p: (2 PRS, OL) * 6 = 24 PRS
5 p: (PR, 7 sc) * 3 = 27 sc
6 p: (5 RLS, PR, 3 RLS) * 3 = 30 RLS
We skip the last
7 p: 30 PRS
Then we will knit in rows back and forth. In purl rows, it is better to knit purl
RLS, the canvas will look smoother.
8 p: we knit as a continuation of the circular rows 6 sc, VP, unfold
9 p (out): starting from the 3rd loop from the hook (the loop on the hook does not count anywhere) 5 RLS, VP,
deploy
10 p: starting from the 3rd loop from the hook 4 SBN, VP,
deploy
11 p (out): starting from the 3rd loop from the hook 3 SBN, VP,
deploy
12 p: starting from the 3rd loop from the hook 2 SBN, VP,
deploy
13 p (out): starting from the 3rd loop from the hook 1 RLS,
cut the thread, fix
We knit the second ear: counting from the first
ear in the course of knitting 9 loops, to the 10th
attach the thread, do the VP – this is the first
column of the first row.
We repeat 8-13 pp:
8 p: we already have the first column, we knit
5 more sc, VP, unfold knitting
9-12 pp unchanged
13 p (out): starting from the 3rd loop from the hook
1 sc, VP, expand
We tie the helmet around the entire RLS circle, on
the corners of the ears make PR 3in1. At the end we do the CC
in the first loop, cut the thread, leaving the end
for sewing, fix.
We take all the ends of the threads on the wrong side to the top
part of the helmet, we stuff it. Sewing end
we display on the border of the upper part and the ear.
We will sew in a circle, except for the ears. By
quilting the border of the ears, stitching the needle back,
grabbing the canvas of the torso.
We sew the helmet on the top of the head.
Glasses (brown):
We collect a chain of 30 VP
1 p: starting from the 2nd loop from the hook (the loop on the hook does not count) we knit for one wall: 10
RLS, 4 VP, skip 4 loops, 2 RLS, 4 VP skip 4 loops, 8 RLS, 4 RLS in one loop
(there must be an extreme loop from the chain)
2 p: we tie the part in a circle: 8 SS, 7 sc in the arch from VP, 2 SS, 7 sc in the arch from VP, 10 SS,
4 sc in 1, 9 SS, 7 sc in the arch from VP, 2 SS, 7 sc in the arch from VP, 9 SS
cut the thread, leaving the end for
sewing, fix.
We pin the glasses on the helmet with the wrong side up. Sew the ends together at the back,
and then attach with one or two stitches to the helmet on the back, front and sides.
BIBI
Head – body (yellow):
1 p: 6 sc in the amigurumi ring
2 p: 6 PR = 12 sc
3 p: (PR, 1 sc) * 6 = 18 sc
4 p: (2 PRS, OL) * 6 = 24 PRS
5 p: (PR, 7 sc) * 3 = 27 sc
6-12 RR: 27 PRS
We insert the ball. About 1/4 of the ball should remain uncovered, knitting should
wrap around the ball quite tightly.
13 p: (4 sc, UB, 3 sc) * 3 = 24 sc
14 p: (UB, 2 RLS) * 6 = 18 RLS
15 p: (1 sc, UB) * 6 = 12 sc
16 p: 6 UB = 6 PRS
Cut the thread, pass the end through everything
the remaining columns and tighten the hole.
Housing (light gray):
1 p: 6 sc in the amigurumi ring
2 p: 6 PR = 12 sc
3 p: (PR, 1 sc) * 6 = 18 sc
4 p: (2 PRS, OL) * 6 = 24 PRS
5 p: (PR, 3 RLS) * 6 = 30 RLS
6-8 RR: 30 PRS
9 r: we knit by the front wall (PR, 9 RLS) * 3 = 33 RLS
10 p: we knit for the front wall 33 СБН
11 p: 33 PRS
We make a SS, cut the thread, leaving a long end for
sewing, fix. Bend the edge.
We knit another exactly the same piece.
Sew on the folded edge. Sew on at a distance of 6 rows from the initial ring (since
the beginning of the row when knitting in a spiral is shifted, the first 2-3 loops are sewn on
distance of 5 rows, then everything falls into place). We grab the edge loops in one
the wall. Be sure to take into account that we have 33 loops on the edge, and in the row to which we sew
30 loops, i.e. in three places (evenly in a circle) we grab 2 loops each.
We do not cut the thread, we output it inside at the bent
parts. Now we will sew the body to the ball.
We will sew on the first row of the remaining
rear walls.
First, we pin the details to the base. It should be visible in front between them ≈ 5 yellow
rows. At the back, almost half of the ball, the body parts will be sewn close to each other.
We have 18 unconnected loops.
The parts connected at the back are simply sewn between itself, it is not necessary to sew them to the base.
Sew the front part for the previously indicated
wall, it is inside us.
Find and mark the middle of the front,
then we make marks in the middle in the back and on
equal distance on the sides.
With a light gray thread, with a chain stitch, we embroider the ribs from marks to
starting ring. We do it on both parts: on the top and on the bottom.
at the link indicated:
https://vse-sama.ru/bufy-i-shvy/uzelok-rokoko-petlja.html
we study a loop (knot) “rococo” and such knots
on the folded part of both parts between the ribs
we embroider 4 nuts, we have 9 turns around the needle
Eyes (white), 2 pcs:
We take thin yarn, hook 1.25-1.5 mm
1 p: 6 sc in the amigurumi ring
2 p: 6 PR = 12 sc
3 p: (PR, 1 RLS) * 2, OL, SS – incomplete row
cut the thread, leaving the end for sewing,
fix.
Sew on rhinestones, retreating literally half a row
from the edge of the eye to the center.
Sew the eyes on the yellow part. Distance between eyes ≈ 1 column, pupils mow inward.
Green floss in 2 folds with chain stitch embroider a ring around the rhinestone.
Hands (light gray):
We knit 3 double loops with a doubled thread
chain. Cut the thread not very short, end
Pull the threads through the last loop.
We attach the handles on the sides to the bottom folded edge.
We tighten, we tie the ends of the threads in pairs in knots
(one knot above the handle, the second under the handle) and remove
İnside
Antenna (brown):
We knit 3 loops with a double chain. Cut the thread not very short, pull the end of the thread
through the last loop. We attach to the crown, tie with a knot, remove the ends.
Light bulbs (one red, the other green):
On the sides, ≈ through a row from the antenna we embroider
light bulbs loop (knot) “rococo”, we have 12 turns
around the needle.
Wheels (dark gray), 2 pcs:
Detail 1:
1 p: 5 sc in amigurumi ring
2 p: 5 PR = 10 PRS
We make a SS, cut the thread, fix it.
In the middle we embroider a loop in yellow
“Rococo”, we have 12 turns around the needle.
Detail 2:
1 p: 5 sc in amigurumi ring
2 p: 5 PR = 10 PRS
We fold the part with the wrong side to each other.
a friend and through both edges we knit a row of SS.
The posts will be knitted on the side of part 2.
Having knitted the last SS, cut the thread, leaving the end for sewing, do not fasten, but
just pull out.
Sew the wheels on the sides through 2 rows from the bent part of the body. We sew each
side separately.
BIBI IS READY!
Amigurumi Baby Girl Free Pattern Amigurumi Bear Amigurumi Bear Free Pattern Amigurumi Bear With Amigurumi Bear With A Heart Amigurumi Bear With A Heart Free Pattern Amigurumi Bird Amigurumi Bull Amigurumi Bunny Amigurumi Bunny Girlfriends Free Pattern Amigurumi Bunny Liliac Free Pattern Amigurumi Cat Amigurumi Chick Amigurumi Chicken Amigurumi Cow Amigurumi Dalmatian Dog Amigurumi Dalmatian Dog Free Pattern Amigurumi Dog Amigurumi Doll Amigurumi Doll Free Pattern Amigurumi Easter Chick Amigurumi Giraffe Amigurumi Giraffe Free Pattern Amigurumi Girl Amigurumi Girl Free Pattern Amigurumi Hedgedog Amigurumi Melman The Giraffe Free Pattern Amigurumi Snowgirl Amigurumi Teddy Bear Amigurumi Teddy Bear Keychain Free Pattern bear Bunny Cat Crochet Bear Crochet Bear Free Pattern Crochet Bunny Crochet Cat Crochet Dog Crochet Doll Crochet Girl Crochet Hedgedog Crochet Snowgirl Dog Doll Snowgirl
